ASK FOR A QUOTATION
EASY BOOKING
NEED HELP
SEND AN EMAIL
REQUIRED A SAMPLE REPORT
Smart Solution 3:

Pre-Shipment Inspection+Construction Check in laboratory


WEINSPECTION conduct the Pre-Shipment Inspection and picking up the sample to laboratory
for the Construction Check for Electric and Electronic products to make sure the compliance
of lots to the safety standard/certification sample.

Pre-Shipment Inspection+Construction Check in laboratory (PSI+CC)

Construction is very important for the Electronic and Electrical products, it can detect the non-conformities of the general electric safety, it can detect the deviations between the lots of product to the certification samples/testing samples.
Weinspection provide the service Inspection+Construction check in laboratory(INS+CC), we conduct the Pre-Shipment Inspection (PSI) then pick up the samples (SAM) to our laboratory then make Construction Check in laboratory (CC); It is a effective way to see if your lot products are same with the testing samples.
Below key points but not limited to, are covered by our INS+CC service:
1.Verify the CDF
2.Verify the internal and external wire
3.Resistance to Electric strength test
4.Earth continuity resistance test
5.Verify earth terminal
6.Verify the clearance and creepage distance
7.Verify the marking
Both Pre-Shipment Inspection(PSI) report and Construction Check(CC) report will be issued to customer for this service. Construction Check (CC) report will be issued within 2 working days after Pre-Shipment Inspection (PSI) completed.